#101740 Polaris Current Sportsman and Scrambler Winch Mount


This product is currently out of stock

4.9 average, based on 7 reviews

Product Code: 101740

Manufacturer: KFI Products

Brand New "KFI" Winch Mount for the Following Polaris ATV's:

Polaris ATV'sYear
Scrambler 850'13-20
Scrambler 1000'14-18
Sportsman ETX'15-16
Sportsman 400'11-14
Sportsman 450'16-20
Sportsman 500'11-13
Sportsman 500 Touring'11-13
Sportsman 550 (XP)'09-14
Sportsman 550 Touring'10-14
Sportsman 550 X2'10-14
Sportsman 570 / SP'14-20
Sportsman 570 Touring'14-20
Sportsman 570 X2'15-20
Sportsman 800'11-14
Sportsman 850 (XP, Highlifter)'09-20
Sportsman 850 Touring'10-20
Sportsman 850 X22011
Sportsman 1000 XP'15-20
Sportsman 1000 Touring'15-20
Sportsman 6x6 Big Boss'11-20

Mount designed to work with the following winches:

  • KFI: ST17 / A2000 / A2500-R2 / A3000 / SE25 / SE35
  • KFI:  AS-50 (requires purchase of ATV-MR)
  • WARN:A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0s
  • WARN:RT15 / RT25 / RT30 / XT15 / XT25 / XT30
  • WARN:Vantage 2000-3000lbs / Provantage 2500-3500lbs
  • RAMSEY : ATV2500 / ATV3000
  • SUPERWINCH : LT2000 / LT2500 / LT3000 / LT4000ATV (Will NOT work with Terra 25/35/45)
  • MILE MARKER :PE2.5 / PE 3.5 / VMX2.5 / PE2000 / PE3000 / PE2500 / PE3500
  • MASTER LOCK :1500lbs #2955AT
    • Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
  • CYCLE COUNTRY :Work Power 1500 and 2500
  • BADLAND: 2-Hole Winches (Click Here for Details)
  • BADLAND:Standard 4-Holes Winches (Do NOT Fit)
  • VENOM:  2500 / 3000 / 3500 / 4000 / 4500 / 5000 (Hardcore Series)
    • All with 3.00" x 4.875" bolt pattern mount-up.
  • CHAMPION : 2-Hole Winches (Click Here for Details)
  • CHAMPION : Standard Winches (Click Here for Details)
  • KEEPER CORP. TRAKKER :KT2500 / KT3000 / KT2500C / KT3000C
    • Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
    • Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
    • Listed models come with incorrect ATV roller fairleads.
  • SMITTYBILT :XRC 3.0 / XRC 4.0
  • XGEAR:  X3000 / X4000
    • 4-Hole Standard (3.00" x 4.875" bolt pattern.
  • Traveller:1078088 / 1078302
    • Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF
  • Possibly many others with the below standard mounting patterns, call to confirm.
    • 4-Hole Standard (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)
    • 2-Hole (3.10" with rollers that are 4.875" bolt pattern)
  • QUADBOSS: RP25 / RP35


  • 100% MADE IN USA.
  • Constructed of 10 GA GR50 steel
  • Designed to fit between in the OEM location below the radiator 
  • Unlike all other mount competitors, our mounts are metal bead blasted before they are powder coated for the best possible finish prep.
  • Powder coated black for supreme durability.
  • Mounts the same as OEM intended.
  • Works with all Polaris OEM Brush Guards and Double Tube Bumpers.
  • Very easy to install.
  • Complete installation instructions included.
  • All mounting hardware included.
  • Will work with Polaris Glacier Plow.
  • Satisfaction guaranteed.
  • Roller fairlead and winch not included.


Why buy the OEM Kit when you can  SAVE $100-$150 by getting your winch separate and buying our High Quality 100% American made winch mount.  Your Sportsman is pre-wired with the battery wires pre-ran from your battery to the contactor mount located under your front RH wheel well.  We have everything you need in our kit to mount your winch and fairlead.

Customer Reviews

Exact Fit

Bought for my 2019 Sportsman 570 and bought an badlands xzr 3500 winch and only had to trim toe bolts just because I bought a big winch. Other than squeezing a big winch in it, it went right in and it is still holding strong several months later.

Jarrett Winkles :: Jun 02 2020, 11:10 PM

Winch mount

Just one more thing I forgot to mention, the Fairlead actually worked but I did have to drill the mounting holes out just a fraction. Badland Winch 3500 lb. #61357

Joe :: Jul 30 2018, 09:04 PM

Winch mount

The winch mount fit my 2018 Polaris Sportsman 450 just like it should, I had a HF Badlands 2500 winch it fit good but very noisy, I compared Badlands 3500 winch measurements from the manual, I could not see why KFI states "BADLAND: Standard 4-Holes Winches (Do NOT Fit)" I bought the HF Badlands 3500 winch item#61257 with 4 holes and it fit perfect using the KFI 101740 winch mount, (no drilling new holes) This winch is VERY quiet, I am happy...

Joe :: Jul 30 2018, 08:50 PM

Winch mount on 2015 Polaris 570 touring

This is a nice solid mount. Used it to mount a badlands 2500 pound winch to my 2015 Polaris 570 touring. The only issue I had was I needed to cut a small notch in the plate to clear a nut on the bottom right side. Just used a cut off tool and then spray painted it black. Used the winch numerous times and plate held up and performed flawlessly. Would highly recommend this product to anyone and I am doing just that. A friend just bought the same ATV and winch and I sent him here for the plate to mount it.

Darren :: Dec 13 2015, 12:29 AM

Worked Perfectly

Just purchased this winch mount after 2 unsuccessful attempts with a local motorcycle shop to find the correct mount for my machine, winch and plow. I was very impressed with how easy it was to install and works great with my polaris plow. Installed on a 2011 sportsman 850 XP, Warn XT25 winch and Polaris Glacier Pro Plow. Would highly recommend this mount to anyone. I had to connect the wiring onto the winch before attaching to the mount. Other than that misstep on my part everything else went together smoothly.

Anonymous :: Oct 17 2014, 12:33 PM

Write a review

© 2017 Kappers Fabricating, Inc.  1-877-346-2050